AS 32x42x4 Radialtätning NBR
Material NBR | Radialtätningar är till för att täta roterande eller svängbara maskinelement (främst axlar).
Lägg till en bevakning så meddelar vi dig så snart varan är i lager igen.
AS 32x42x4 Radialtätning NBR
Material NBR | Radialtätningar är till för att täta roterande eller svängbara maskinelement (främst axlar).
Här har du en radialtätning även kallad packbox som passar på axlar som har en diameter på 32 mm. Ytterdiametern är 42 mm och bredden är 4 mm.
Denna variant av radialtätning är gummibeklädd av NBR (Nitrilgummi) och är försedd med dammläpp som ger ett extra skydd för axel och tätningsläpp mot bland annat smuts och damm.
Tänk på att det är svårt att mäta innerdiametern direkt på en radialtätning. Vi rekommenderar att du mäter på axeln som den ska täta emot för att få rätt innerdiameter.
FULLSTÄNDIG BETECKNING: | AS 32x42x4 |
---|---|
( d1 ) AXELDIAMETER: | 32 mm |
( D ) YTTERDIAMETER: | 42 mm |
( B ) BREDD: | 4 mm |
TEMPERATUROMRÅDE: | -40°C till +100°C |
MAX TRYCK (BAR): | 0,5 Bar |
MATERIAL: | NBR - Nitrilgummi |
HÅRDHET: | 70° Shore |
ALTERNATIVA BETECKNINGAR: |
ASL 32x42x4 BASL 32x42x4 CC 32x42x4 DGS 32x42x4 GB 32x42x4 HMSA10 32x42x4 OS-A11 32x42x4 RST 32x42x4 TC 32x42x4 WAS 32x42x4 WDR827 S 32x42x4 AS 32*42*4 AS 32-42-4 AS 32/42/4 AS 32x42x4 Packbox |
TOLERANSER FÖR AXEL: |
Tolerans: ISO h11 Hårdhet: min. 45HRC Grovhet: RA - 0,2 - 0,8 μm Rz: 1-5 μm R max: ≤ 6,3 μm Ytfinish: Fri från ojämnheter |
TOLERANSER FÖR HÅL: |
Tolerans: ISO H8 Grovhet: RA = 1,6 - 6,3μm Rz: = 10-20 μm Rmax: ≤ 25 μm |
ÖVRIGT: | Armeringsring: Stål DIN EN 10139 Fjäderring: DIN EN 10270-117223 Radialtätning med fjäder och dammtunga för att skydda mot yttre föroreningar |